Header Ads

New York, united states

Here’s Why Iron In Water Is Harmful For You And How To Detect It

Waterboss iron reduction filter reviews
Waterboss iron reduction filter reviews
You must have heard the presence of iron in water is bad for your health and environment. But how bad exactly? Moreover, how can you detect iron in the water?

Read ahead to make yourself aware.

Harmful effects of iron in the water.

1. Skin Hazards

If you drink water with a higher concentration of iron and magnesium, you can get wrinkles on your skin. Also, when you are making soap lather, know that water having iron does not blend with the soap. You will end up using more water and still parts of soap residue will be on your skin.

This will cause pore clogging, causing acne and eczema in the long run.

2. Staining Effects

Iron is notorious for leaving stains on things it gets in contact with. If water having iron contents is used for dishwashing and laundry, you will end up having stains on your crockery, as well as on your clothes.

Another thing to worry about is iron stains in showers and toilets. If you don’t take care of the problem, it will be hard to get them removed.

3. Clogging Problems

Water having high iron contents clogs pipes and drains. This is because iron residue starts building inside the pipes. 

On one side, you will have access to reduced water pressure in the home while on the other, the deposited iron may burst the pipes. Read whole home iron filter reviews to help get rid of iron.

Detecting Iron in Water

Performing an Iron Test

Before performing an iron test, see the color of water. If water has a reddish, brownish or yellow tint, it is likely that it has rich concentrations of iron. Get yourself an iron testing kit for detecting iron in the water.

To perform the iron test, remove the foil of iron reagent tablet and put it in the test bottle. Fill the bottle to the top, leaving a space of a ¼ inch. Close the bottle and shake for one minute, until the inserted tablet has been dissolved.

From the packet, remove the test strip and dip it into the water sample for two seconds. Now shake the strip once and wait for a minute. 

Observe the color of the strip and match it with colors of a given color chart. 

Iron Safe Level

It is important to know that the EPA – Environmental Protection Agency classifies iron under secondary maximum contaminants. If the presence of iron in water is more than 0.3 milligrams of iron per liter, it will deteriorate the transparent color of water, have unpleasant odors and will have a negative impact on your health.

Know that 0.3 mg/l is a threshold of EPA. It is the desired level which can exist in water however problems can appear upon rising of iron in the water. It has also been found out that 1.0 mg/l is the highest permissible water level. You simply cannot go further than this threshold as even a minute increment will cause the health issue.

Try reading the Waterboss iron reduction filter reviews for taking care of water having iron contents.

No comments

Powered by Blogger.